Strategies to Fix HP Printer Light Blinking Error

In different scenarios, HP printers are supposed to blink different lights so that it could indicate what is happening with your printer. However, not all the light it blinks is supposed to give you positive indications. Sometimes, the blinking lights also indicate that there is a problem with your printer which is supposed to be fixed. So, in that case, what you need to do is rely on some solution that would help you get away with this particular issue. Therefore, today, through this article, we will be sharing some highlights on how to fix the hp printer light blinking error.

Fix HP Printer Light Blinking error

Along with finding out a solution to fix the blinking light issue, we shall also try to figure out what each kind of blinking light means. So, without further ado, let’s get into this topic and try to figure out all the possibilities that lie behind this problem.

Why is HP Printer power button blinking?

There could be different reasons why the power button on your HP printer keeps blinking. If this button is blinking at a steady level, then you need to understand that it is processing a print job. On the other hand, if you see that the power light is blinking at a fast speed, then you need to ensure that it happens when the cartridge access is left completely or slightly opened. In case your HP printer is in an error state, then also you are supposed to see the power light blinking constantly.

Why is the wifi light blinking on my HP printer?

If you see that the wi-fi light on your HP printer is blinking constantly, then the following could be the reason behind it:

  • The printer is supposedly trying to connect to a nearby available wireless network
  • When the printer searches for the wireless network but are not able to connect to it, then also the wi-fi light would keep blinking constantly
  • In case you are connecting your printer through a wired connection, then you should turn off the wireless connectivity option to fix this issue

Understanding why is the yellow light flashing on my HP printer

Before we tell you how to Fix HP Printer Light Blinking error, it is important to understand why is the yellow light blinking on your HP Printer. Well, we cannot actually figure out what is causing the issue. One of the few reasons why it is happening is because you might have left one of the covers of your printer opened. Apart from that, when a particular light on your HP printer remains open, then also the yellow light would blink.

To fix this problem, do the following:

  • Verify if the covers are closed or not. If not, close them properly.
  • You can also try removing and closing the electric contacts in your printer.
  • You may try to block the cover sensors of the printer
  • Examine the rear panel of the printer and see if everything is working fine or fix any kind of defects with the printer

Why is the orange light blinking on my HP printer?

Among different reasons why your HP printer is blinking orange light, the following could be the most responsible ones:

  • There is a problem with the ink cartridges in your printer
  • The toner present in your printer is problematic
  • The printer configuration is corrupted which means your printer is incorrectly configured

How do I fix the flashing light on my HP printer?

Is your HP Printer offline or the printer is blinking lights in such a manner that you have witnessed before? If yes, you can try the following solutions to Fix HP Printer Light Blinking error immediately:

Reset your printer

  1. You first need to disconnect all the cords from your printer
  2. Let the printer sit idle for a few minutes
  3. Reconnect the cords back to their primary position
  4. Verify if the lights are still blinking

Fix cartridge-related issues

In order to fix any issues with the ink cartridges in your printer, you can follow the steps listed below:

  1. Access your printer’s cartridge area and remove the cartridges carefully
  2. Remove the power cable as well as the USB cable from your printer
  3. Followed by this, press the power button on the printer
  4. Next up, re-plug the cables after waiting for some time
  5. Restart the printer to check if the issue is resolved

Conclusion:

If you are constantly seeing one of the lights blinking on your printer in an abrupt manner, then what you would do is check out the main reasons and the troubleshooting solutions that are given here. Just make sure that you do follow these guidelines carefully so that you do not come across the same issue ever again. However, before trying out any given solution, try to figure out what the main reason behind that blinking light is.

Add a Comment

Your email address will not be published.

Disclaimer: The website "hpsupportassistants" has been created in the general interest to help users learn more about Hp and its products. We are not associated with the brand HP in any manner and we do not endorse their product(s) or service(s). We suggest you utilize this website on your own accord after acknowledging the consequences.